The RealWear Head-Mounted Tablet (HMT) is designed for skilled technicians and engineers in field service, equipment inspection, maintenance and complex manufacturing assembly.

Like enterprise tablets, the RealWear HMT-1 runs a landscape display with enough pixel resolution to display PDF documents, maintenance and assembly manuals. Porting smartphone, Android tablet apps, and enterprise business apps in HTML-5 is an easy process with its Android operating system.

Like wearable smart glasses, the RealWear HMT-1 is a heads-up display experience with glanceable information delivered immediately to the worker on demand.

Transcending tablets and smart glasses, the HMT-1 has a completely hands-free voice-visual user interface allowing workers to operate the tools and equipment needed for the job, even if climbing a scaffold or tower, without ever having to pick up or touch a mobile device.



Technical specifications

 eye DISPLAY 854×480 pixels – appears the size of 7 inch tablet at arms-length and viewable in bright sunlight
 hmt-1_specs_icons_0001_boom-arm BOOM ARM  Adjusts six ways to accommodate any head size or eye relief – flips display out of way when not in use
 hmt-1_specs_icons_0012_cam CAMERA  16MP, autofocus and 4 axis optical  image stabilization for hi-resolution photo capture and real-time video chat
 hmt-1_specs_icons_0011_mic ALL EARS Four digital microphones and advanced active noise cancellation
 hmt-1_specs_icons_0010_handsfree 100% HANDS-FREE Local speech recognition in loud industrial areas – no buttons, swiping, or gestures
 hmt-1_specs_icons_0009_sound LOUD & CLEAR Integrated 91dB speaker and 3.5mm audio jack for use with hearing protection
 hmt-1_specs_icons_0008_rugged RUGGED   IP66 – dust proof & waterproof – 2 meter drop test onto concrete – MIL-SPEC 810G
 hmt-1_specs_icons_0006_andoid POWERFUL Self-contained Android 6.0 Qualcomm Snapdragon 625 platform with 2GB RAM/ 16GB Flash
 hmt-1_specs_icons_0005_wifi CONNECTED Wi-Fi + Bluetooth 4.1 LE. Tether to smart phones, portable hotspots, or plug-in USB dongles for LTE access
 hmt-1_specs_icons_0004_safety PROTECTED Clips on to hard hats. Works with safety glasses and goggles. Weight 370g
 hmt-1_specs_icons_0003_tracked TRACKED GPS, gyroscopes and digital compass for positioning – detects Bluetooth beacons
 hmt-1_specs_icons_0002_battery WORKS LONG SHIFTS Rechargeable, removeable, hot-swappable full shift hour battery (3250mAH)
 hmt-1_specs_icons_0007_z1 INTRINSICALLY SAFE MODEL HMT-1-Z1 model is for potentially explosive environments in oil & gas, etc. FMC1/D1 – ATEX Zone 1 (battery non-removable)
RELATED TO YOUR INTERESTS
Metas 3000 3dglasses Look To An Augmentedreality Future Metaglasses


ACCESSORIES

Extra battery

A 3300 mAH additional or replacement lithium ion battery for the RealWear HMT-1 – identical to the included battery.  Accessible through the door at the rear of the HMT-1, the battery may be replaced at any time with a fully charged battery. The hot swap capability of the HMT-1 means that applications will continue to preserve their state during the battery swap and a reboot will not be required. Batteries may be charged either inside the HMT-1 when the charger is attached to the Type C USB port, or externally when placed in the multi-battery charger.

Extra battery charger

A type C USB charger, identical to the included charger, with a 2 meter cable.  This charger has been certified by RealWear to source sufficient current to completely charge the large 3300 mAH battery in approximately 4.5 hours, to not overcharge or otherwise damage the battery. Use of the RealWear charger is recommended as third party chargers may slightly drop their voltage when providing high charge currents, resulting in incomplete charging of the battery.

RELATED TO YOUR INTERESTS
Oculus Story Studio University Ovrstorystudio To Bring Vr Film Workshops To Nyu And Usc

Multi-battery charger

A desktop charger that can charge five RealWear HMT-1 batteries simultaneously when removed from the HMT-1. This unit permits 24×7 operation for work teams operating in shifts, by ensuring freshly charged batteries are always available.

Replacement head stabilizers

A pair of head stabilizers that clip into place on the RealWear HMT-1 to rest on the top of the head. These support the weight of the unit, if it is not attached to a hard hat.

Replacement hard hat clips

A pair of hard hat clips that connect to the hard hat receptacles typically used to attached hard hat chin straps or earmuffs, and also clip to the RealWear HMT-1.

Replacement foam mesh

The foam mesh on the interior of the headband cushions the unit against the head for a comfortable fit. This is a consumable part and should be replaced after normal wear and tear or if it becomes soiled.

Optional front strap

If worn without a hard hat, the RealWear HMT-1 may optionally be secured with a strap that crosses the top of the forehead. For certain head sizes and head shapes this strap may improve the fit and comfort of the unit. This strap is washable.

Optional interior rear strap

For particularly small head sizes, for example petite women, the fit of the RealWear HMT-1, if worn without a hard hat, can be improved with the use of a rear strap that attaches to the interior headband. This strap has a ratchet mechanism for tightening the strap in fine increments.

RELATED TO YOUR INTERESTS
Ionvr Is A Smartphone Vr Headset That Aims To Kill Latency Rtovr Goo Glsldwcm

Carrying case

Made of ballistic nylon and shaped internally to fit the RealWear HMT-1 this case will optimally protect your unit for transportation in backpacks or luggage, or for storage.

RECOMMENDED THIRD PARTY ACCESSORIES

accessories_huawei_lte4G LTE USB Stick

Huawei E3372 4G LTE Cat4 USB Stick – enables 2G/3G/4G cellular data connectivity for the RealWear HMT-1.

If cellular data connectivity is required for the RealWear HMT-1, as an alternative to tethering the unit over Wi-Fi to a smart phone or portable cellular hotspot, this USB modem may be plugged into the Micro USB port of the HMT-1, via a short adapter cable that converts from micro USB (on the HMT-1) to type A USB (on the modem).

The HMT-1 is able to provide sufficient power to the LTE modem through the micro USB port.   The LTE modem may be secured to the rear headband of the HMT-1 using a small Velcro tie.   A SIM card from a cellular carrier must be installed in the USB Stick.

Plugfones Contractoraccessories_plugfones

Hearing protection solution with 25dB Noise Reduction Rating (NRR).

In loud environments where hearing protection is required, these earplug headphones from Plugfones allow the audio from the RealWear HTM-1 to be connected via the 3.5mm jack and clearly heard while also providing ambient noise reduction.

Note that the advanced noise cancellation built-in to the HMT-1 means that no additional microphones are required in the hearing protection solution.

realwear.com

 

prev published post
next published post